You may also need to uninstall IPv6 packages. Hit CTRL+X, then Y, then Enter to save.At the very end of the line add ipv6.disable=1.At the command prompt type: nano /boot/cmdline.txt.Disable IPv6 by editing the /boot/cmdline.txt file: Most VPN's cannot hide your IPv6 info, so we need to disable it. Use the arrow keys to navigate down to _conntrack_max and set it equal to 32768 At the command prompt type: nano /etc/sysctl.d/nf.Increase the Max Connections by editing the /etc/sysctl.d/nf file: Open PuTTY and SSH into your Raspberry Pi using its IP address (192.168.1.2) and login In /etc/nf section, change /var/opkg-lists to /usr/lib/opkg/lists Go to System -> Software then click Configure opkg.Go to Network -> Interfaces -> Global network options and check Packet Steering.Go to System -> System -> General Settings and set your Timezone.Install Nano editor by typing: opkg install nano.Install LuCI Web Interface by entering: opkg update & opkg install luci.poweroff your Raspberry Pi, plug it's ethernet cable into an unused port on your network, power it back on, reconnect your PC to your network and SSH back in with PuTTY using the new IP Address (192.168.1.2).Change the IP Address to an unused IP address on your network (I'm using 192.168.1.2 as an example) by entering: uci set =192.168.1.2 & uci set =192.168.1.1 & uci set =192.168.1.1 & uci commit.Change your password by typing at the command prompt: passwd root.Use PuTTY to SSH into your Raspberry Pi using 192.168.1.1 as the IP address and root as the login (no password).Insert the SD card into your Pi and use the USB-C power plug to power on your Raspberry Pi.Disconnect you PC from your network and plug your Raspberry Pi into your computer with the Ethernet cable.Download and install PuTTY so you can SSH into your Raspberry Pi.When Etcher is complete a popup will tell you you need to format your drive, click Cancel.Use Etcher to flash the OpenWRT firmware image onto your MicroSD card. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |